Depending on the model, you may be able to use needle-nose pliers to remove the filter. Locate the filters and check if they are clogged. To check the water inlet filters, turn off the water and disconnect the inlet hoses from the washer. If the filters are clogged, it could cause the nF error. Most Samsung washers will have filters where the water inlet hoses connect to the washer.
Straighten out the hose if it is restricting the water supply to the washer. The washing machine may have been pushed too close to the wall to cause the problem. Occasionally, water supply hoses become kinked or crimped and cause the nF error code. The door or lid switch can be tested with a multimeter for continuity (a continuous electrical path) to determine if it needs to be replaced. If the door does close properly, there may still be a fault with the door or lid switch, as it could be falsely telling the control board or timer that the door is not closed. If the door is not closing properly, the door lock assembly will likely need to be replaced. The door switch (front-loaders) or lid switch (top-loaders) tells the control panel or timer to fill the washer once the door is closed correctly. Some Samsung washers will not fill with water if the door is not properly closed. Clean the filter with soap and water and return it to the washer. Then remove the debris filter by turning it clockwise and pulling it out. Remove the white drain plug from the hose, and drain the water into a large container. Open the debris filter access cover and locate the black rubber drain hose. If your Samsung washer has a debris filter, cleaning out the filter may resolve the nF error code. Clean Out the Debris Filter (Front-Loaders) The washer usually requires the water supply valves to be turned on all the way. Make sure to check both the hot and cold water supply valves. If the washer is showing an nF error code, check that the water supply to the washer is turned on. This guide applies to the following Samsung models:
#Samsung flow sending failed code#
If the nF error code returns, follow the following steps to identify and fix the problem. Turning the power off and on will clear the false error code. Samsung washers have been known to have glitches in which the washer displays false error codes. If you get an nF error code, the first thing to do is shut off the power to the washing machine. *If you're using another Antivirus just look for similar settings and set the Firewall Profile of the LAC Adapter/network to** Private**.The nF error code on a Samsung washer means that the washer is not filling with water (nF = no fill). that is what worked for me and now can send files faster. Try sending the failed file and it should work this time. OR Go to Network Profiles (click Settings under Current Network) and change the LAC network adapter Profile to Private. The Firewall Profile for the network will be set to Public. You will notice a new network that will appear below your connected Ethernet/WiFi network. you will see under*** recent apps Managed by your Firewal **l that * "SamsungFlowDeskto**p" app was blocked. in this case files are blocked for security reasons i guess.Ĭlick Protection > Firewall.
#Samsung flow sending failed Pc#
On my PC (running Windows 10), my antivirus had settings for the network created through the Microsoft WiFi Direct Virtual Adapter to Public which meant there will be certain restrictions to what can be allowed to be send through the network (the way i interpret it) - mine is Local Area Connection *3 (Adapter). The Firewall settings on your antivirus could be the cause. I found a solution to a problem that makes sharing files between a PC and your Phone through the Samsung Flow app impossible.
Join the official r/Samsung Discord Rules
0 kommentar(er)
